Questions & Answers for: Singer cover stitch

...moving like they should. Usha janome magic stitch removal of right side cover My brother lock 546D has seized what can do My singer touch and sew is stuck can get it to go up and down twice and...

...it or change it. What can I do to fix this? The stitch lenght lever is probably siezed, remove the cover to reveal, and carefully oil the lever mechanism, gently moving the lever as you

...stitch length (not usual for free-motion), threading and re-threading both bobbin and machine. What else can I try? Thanks! It sounds like your feed dogs are up. I don't know if you have a cover for ...

how do I end cover stitch How do I end stitching the cover stitch? I use fray check on all my stitches.

...cover to bend enough so the stitch-adjustment levers can be forced through the slots. As you pry the lower edge of the cover forward/outward: (1) Push the lever through the slot in the cover with a ...

...and the next in the opposite direction. Make sure that the stitch is wide enough to cover the area next to the tear and hold it securely. It is a good idea to stitch over the tear several

...cover to bend enough so the stitch-adjustment levers can be forced through the slots. As you pry the lower edge of the cover forward/outward: (1) Push the lever through the slot in the cover with a ...

...higher than zero? Since your machine is new and you are unable to get it to work properly, it is covered under warranty. ...

...available here: https://www.singer.com/support . Singer has two manuals for the 6212. (One manual covers two machines; the other covers 7.) The manual to the first manual is currently here: ...

...stitch choice. The zig-zag cover plate is appropriate for most stitches. Four different cover plates are listed in the included accessories on page 3 (page 5 of the PDF) of the manual. Most Singer ...