Questions & Answers for: cover open close fuser

...Open the top cover. 3. Grasp the purple handles on the fuser. 4. Remove the old fuser from the printer. 5. Install the new fuser. 6. Close the top cover. ...

cover and open it all the way. Carefully take the jammed paper out of the printer. Do not touch the fuser. It is hot and could cause burns! The fuser?s operating temperature is 180°C (356° F

...cover area open front covers and Transfer unit. Fuser is hot transfer unit can be easily damaged. Check left side of opening and remove any jammed paper. Then reinstall print cartridge and close top ...

Cover A Open Paper Tray 5 (Bypass Tray). Lift up the Cover A release lever, and open Cover A. Remove any paper below the Fuser Unit by carefully pulling up and out.WARNING: Do not touch the Fuser Unit

...open the front cover cause the little lever that you press to open it is on the fuser unit. My question is, how can I open the front cover now? Do not understand the problem. The front panel is held ...

...cover is open. Where is it located so I can close it? Your problem: paper is jammed in the back of the printer around/in the fuser. The Users Manual for your printer is located at: ...

...fuser cover and where is it The fuser cover is at the rear of the printer. You will see it easily when looking at the rear. It is probably just open a little. It needs to be in full closed

...jammed paper out. Return the levers, fuser door, rear cover stopper, and duplex guide to their original position. Close the rear cover. Open and close the front cover. Printing automatically

...Open the fuser cover 04: Remove the fuser 05: Remove the new fuser from the packaging 06: Insert the fuser 07: Close the fuser cover 08: Attach the top rear door 09: Lift the paper bail, and then ...

...Open up the fuser cover then close and open up the manual feed and close and the error should go away. If not, it may be either a switch or a fuser issue. Call an authorized Canon/Oce service ...