Questions & Answers for: Whirlpool counter weight

Question about GHW9400 Duet Washer

1 Answer

counter weight is missing. It is not on the floor and since I can?t find it anywhere I assume that the unit was shipped with a broken counter weight. So, I call my extended service plan provider again

Ad

...counter weight Hello, How difficult is it to replace a broken rear counter weight with a new one. I am no expert but I am technically inclined. Does the rear panel have to be removed or is it ...

Ad

Question about GHW9400 Duet Washer

1 Answer

...counter. I think the weight in the machine has fallen as there is cement dust on under the machine sometimes the concrete weights come loose, it will need to be dismantled ( back, top, front, off) to ...

Question about Duet GHW9150P Front Load Washer

1 Answer

...weight vibrating around it could also cause structural problems. I'm getting tired of wrestling it back after each cycle. Front loaders are bad about that. It needs to be inspected internally for ...

Question about Cabrio WTW6600SBT Top Load Washer

1 Answer

...lvel it is ok Check the bottom of the tub for a loose counter weight. it may have come loose or fallen off. Here is a link to a diagram that shows the counter weight. It is number 13 on the

Question about Duet GHW9150P Front Load Washer

1 Answer

...the drum is knocking in the spin mode and there is water leaking, not from pump. I read about the counter weights, the shocks seem fine.... This can be related to a tightness in the spindle shaft ...

Question about Duet GHW9150P Front Load Washer

1 Answer

...weight out of place but isnt any weights on it. Checked the back self leveling legs they are free and move up and down. Possible something In the Transmission?? Thought it either worked or it ...

Question about Cabrio WTW6600SBT Top Load Washer

1 Answer

I cannot get the base to stay put while the washer spins out Manufacturer recommends removing the counter balance weight at the tubs base and installing 2 springs on either side for stability.

Question about Calypso GVW9959K Top Load Washer

1 Answer

...counter weight when the area of attachment is kind of roughed up and I don't think the screws would hold even if I could get them in. difficult to do much there. you could try gluing something to the ...

counter weight during wash cycle.. What to replace? We removed the front panel and the water comes out of the counter weight from behind. There are no visible tears on the boot/seal at all. Check that

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machine Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...