Questions & Answers for: Kenmore counter weight

...spring, where does it attach? 4 springs on bottom of washer 3 from tub to top of base hidden, 1 from rear tub to bottom of base straight down, hole in inner lip of base, to counter weight of

...counter weight which came loose one of the shocks are bad. Yes it is worth getting it fixed and if you are somewhat handy you can fix it yourself. Pull the unit out and unplug it. Open the back panel ...

...panel. look for broken shocks or the plastic rivet that holds the shock on....then there are the counter weights that can come loose...check those and tighten if

counter top that can handle the weight of the unit and a full bucket of water, may solve the problem. The reason for this is in a basement, the air temp at floor level is colder than at shoulder level

counter weight on front load machine is crumbling to pieces and machine makes loud noises during spin cycle The machine makes terrible noise during spin cycles. I noticed there is bits of ground up ...

Kenmore Washer Poor spin, Drain, out of balance check ur counter weights on the drum or the spin bearing?

sand in the bottom of washer Kenmore 400 Model 29422800 I PRESUME U MEAN INSIDE"? OUTSIDE? SOME HAVE A CERAMIC COUNTER WEIGHT AND WHEN IT WEARS U WILL FIND SANDY PARTICLES ALL OVER

...only, small load ok. took out adgittator, dog ears great shape.3yrs old not sure but I ve seen bad counter weights do this ...

...in the final spin cycle when something seemed to have snapped & now makes a horrible banging sound during any spin cycle. perhaps a bad counter weight? which connects from tub to support

...ON IT TO MAKE SURE ITS BALANCED? U CAN RE ADJUST THE LEGS AT BOTTOM. OTHER WISE U MAY HAVE BAD COUNTER BALANCE RODS OR WEIGHTS. AND CHECK UR DAMPER STRAPS AT ...