Questions & Answers for: cotton facts

...be done with the machine turned off and unplugged, clean the contacts with warm water and a damp cotton bud not wet and then dry it with a paper towel. make sure everything is dry before turning ...

...not as a result of dust on the connecting panel. To do this clean the connecting panel with tissue/cotton wool slightly soaked with methylated

...Thank you. Jim Either the glass laser eye lens needs to be cleaned with rubbing alcohol and cotton swab, or the laser lens unit itself is faulty. You may be able to get one from ebay, ...

...contact problem.First remove both cartridges and clean the contacts on carriage unit with piece of cotton and some alcohol.Then clean the contacts on print cartridges too.If this not help you may ...

...The PS2 Game. If Its Dirty Open Up The PS2 And Clean The Laser Sensor With Rubbing Alcohol And A Cotton Swab. It May Also Be The Fact That You Knocked Something Loose And The PS2 Cant Run At Full ...

...your camera. If you feel you can do it by yourself, then what you have to do is to get sufficient cotton wool and methylated spirit. You have to take the camera apart and dry it using the cotton ...

...two option you may replace a new optical lens or try to clean it. in cleaning it you should use a cotton buds then try to wipe it gently and be sure not to touch the optical

...cleaning it first: (1) Open the printer (2) Remove the ink cartridges from the print head. (3) Use cotton swabs dipped in hot water to thoroughly clean the print head. (4) Repeat this until there is ...

middle plate but it only sews for short periods i can not put foot down to sew fast or it snaps the cotton on the top thread (needle thread) could it be the wrong strenght of cotton causing it to fray

power, remove the fan and separate the ends where the bearings are. Clean thououghly with IPA and a cotton bud. Relubricate with high temperature silicone or synthetic oil and reassemble. Test and the