Questions & Answers for: Poulan cord rewind

...lucky you can pull the cord out enough for a pretension then slightly raise and add the withdrawn cord to the spool. Both methods require about 2 turns of pretension to rewind the cord when pulled. ...

...you can pull the cord out enough for a pretension then slightly raise and add the withdrawn cord to the spool. Both methods require about 2 turns of pretension to rewind the cord when pulled. HTH ...

...cord will not rewind Sounds like the rewind spring has broken or the starting spool is broken or the piston is stuck. You will have to take the machine apart to see what it is that stops it from ...

...cord will not keep it's coil. What gives? Morethan likely you have bent the end of the rewind spring and it will not hold onto the cam on the starter pulley. Since the pulley is plastic, the pulley ...

...rewind the spring large coil to small (need eye protection, both hands and no women around work area!). I'm right handed so I tension the spring enough to insert it inside the previous coil while ...

...rewind the starter rewinder? If both ends of the spring are still attached, then turn the spool CCW (remove the cord first) until it is fairly wound, but still be able to turn 5 or 6 turns more to ...

This is a fairly common problem. Take a flat head screwdriver, place it through the holes in the starter cover and move the plastic inside gently. This should jar it loose and allow the cord to rewind

rewind pull cord poulan pro snowblower pulled cord first time and will not rewind back If you are a fix it kind of guy you can remove the starter assembly and check the recoil spring.

Why won't Lawn mower pull cord rewind ? Mower cord pulled all the way out and won't rewind. the springs break when jerked too hard and more than the rope lenght

I have a poulan pro bvm200fe blower wind cold cord will not return on isn't own Suggest that the rewind spring is broken on the end. Disassemble rewind to inspect return spring