Questions & Answers for: Sharp copier noise

the noise comming from the right side of the copier? If so you need the upper fusing roller drive gear. It will break sooner then later. Cheak the fusing gear and the rachet gear it need to be replace

grinding noise still works but makes a grinding noise every second or two when copying. paper bunches up as it starts across heating roller and was making a gear skipping sound my suggestion is ...

AL 1217 noise when started Our SHARP AL-1217 makes a noise - gear slipping kind of noise - when turned on and also while printing at times. What could be the problem ? hi first u check with out drum ...

"machine gun clicking" sound - fuser drive/motor gear area Sharp AR-M205 is refusing to copy - machine gun clicking noise at lower right corner near where fuser drive gear and motor gear train are. ...

...copier. when the copies print you hear a loud noise like grinding wheels. Take the new cart. out and reinstall the old cart. Does the noise disappear? I would tap and shake the toner cart. BUT BE ...

sharp copier makes grinding noise when turn on copier makes grinding noise make copies Contact your dealer for service. You may need to have mechanical parts replaced. 

Making A lot of noise noise is usually in the fuser section of the machine, it needs to be removed and checked. Check the gears where the noise is coming from.

copier makes a loud knocking noise. There is no paper stuck. The copies look fine. It make the same noise as the FEEDING ROLLER makes when there IS something stuck and you manually twist the knob. Any

...problem gears in sharp ar5320e copier. my copier makes cracky noise and almost squeeze paper or cause jams during printing or photocopying Recommended a tech hard to figure out noise over the ...

...NOISE WHEN I TURN ON MY COPIER SHARP MX-2300N AND IT CAN NOT COPY OR PRINT A LOUD NOISE WHEN I TURN ON MY COPIER SHARP MX-2300N AND IT CAN NOT COPY OR PRINT Hi Patience . Have you got anything on the ...