Questions & Answers for: Sharp no cooling down

H 4 flashing on the Sharp AL-1642CS you have a problem in heater section------it may be bad thermistor -----defective heater lamp------blown thermal fuse------bad lamp connector----shut down the ...

...cooling down, still will not power up. I wonder if a fuse blew or if the bulb got trashed. Is there a "reset" button anywhere ? Reset the lamp timer. 1,Connect the power cord. 2,While simultaneously ...

cooling down. Now, when turning power on, the power indicator lamp turns to green and the lamp blinking green (normal warm-up)..but after a few minutes, the lamp indicator turns to blinking red, while

My A/C unit was working fine but I turned it up for an hour or so while we were painting and the doors were open. Since I have turned it back down it will not blow cold air. What could have happened? ...

The AC doesn't seem to cool when the temperature in the room in really high, in the range of 90-95F. It works for 3 minutes, and then stops for 3 minutes. Also, I have read the booklet that came with ...

how do you cool down the system after a presentation? hi, To cool down the projector after use just press the Standby button and leave it in standby mode. The projector itself will cool down and will ...

...panel.Also it is not cooling so well as it was. Thanks. Bryan Cook Model no. CRMC-A569JBEZ I have a cracked-a569jbez inverter but don't know how to put it on cold air can't get it to go down from ...

down. I read something about washing out the fins on the compressor with a hose and letting it dry. Is this okay to do? yes you can wash out fins on codensor. turn off power at breaker wash and let it

cooling fan, the magnetron overheats and its TCO (thermostat) shuts down all power to the oven until it cools back down to a safe temperature, then power is restored. Feel free to e-Mail me at pupista

...cooling the magnetron is running when the unit is turned on to heat. If the fan is not blowing through the mag it will get hot then shut down the unit until it cools down and resets the thermal. Just ...