Question about KP-46WT500 46" Rear Projection HDTV-Ready Television
replacing convergence (stk392-560) any idea on how to properly remove the old convergence aside from the two small screws. i notice the convergence is glued or welded to the metal plates. plus is ...
8 year old 57F500. All of a sudden I am getting blue and yellow showdows The trouble of your tv is the convergence try to adjust it manually using your remote control. If still nothings happens the ...
Question about 53UDX10B 53" Rear Projection Television
Tv is not turning on. Can hear it click, acts like it will turn on, then nothing. The convergence ic may be damage try to check the resistance of ic pin if their is a shorted, you can compare the ...
I have multiple colors on the screen of my 530hd pioneer elite TV when it warms up. When I try to adjust the convergence I am unable to move the red line far enough to converge on the blue or green ...
The picture on my tv seems to look like what my kids say 3D what could be the problem? The problem of your tv is the convergence. Use the original remote then go to setting menu then you will see the ...
hi there, my tv will not allow me to converge the picture. ill push auto converge and it stops and reads "auto converge cannot be completed because a senor was unresponsive. its gotten really bad
my tv is a magnavox and we bought it about 3 years ago and it is now showing like a double picture the color is hazy and pinkish looking the model is 51MP392H/17 The problem of your unit is the ...
I have a sony big screen kp57wv600 and the picture looks like I need 3D glasses. The pictures has a green and red hallo all around the outer picture. The picture is clear in the center and goes out ...
Question about KP-57WV600 57" Rear Projection HDTV-Ready Television
jvc convergence problems If convergence problem model number is needed--most of those sets use two of the stk-392-110 chips on a board right at front of set behind inspection plate behind front grill ...
Question about 50VS69 50" Projection HDTV
what is the procedure to do color convergence on a hitachi 50vs69a color convergence Almost all you can either get into the mode by use of the remote or remove front speaker grill and inspection plate
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
