Question about 43HX70 43" Rear Projection Television
convergence IC's after the convergence went completely wacko....Convergence is perfect now, but the image quality is dull and grainy rather than the crisp, lush picture we had before. Watching DVDs is
Convergence Output IC Failure Corrective Action: Replace the defective Convergence Output IC Part Number 23905094 (STK392-110) using the revised ?T? version IC Part Number 23135090 (STK392-110T). When
...Convergence IC We have some serious color distortion (lots of purple and green ghosts) and the lower left side of the image is now warped. We think it's the Convergence IC, but don't know what this ...
42H83 Convergence Green convergence is curved... Do STKs ICs need to be replaced? I currently have STK392-110 ICs. Yes the convergence ICs need to be replaced, however so dont the six 1.8 ohm 1watt ...
...Convergence IC but I am unsure which I need to purchase. I noticed that someone else is having a similar problem from reading below, but as I read I was unsure which convergence IC I should purchase. ...
Question about TN50X81 50" Rear Projection Television
...convergence IC runs hot...TV powers off after 5min I bought this set with a convergence issue...I replaced the convergence ICs (used the Sanyo parts, and the uprated 150 ones, too) and the picture ...
Question about TZ50V51 50" Rear Projection Television
...Convergence Output IC Part Number 23905094 (STK392-110) using the revised ?T? version IC Part Number 23135090 (STK392-110T). When Convergence Output failure is detected, it?s recommended that both ...
Question about 61HX70 61" Rear Projection Television
convergence IC's have failed. Replace the defective Convergence Output IC Part Number 23905094 (STK392-110) using the revised ?T? version IC Part Number 23135090 (STK392-110T). When Convergence Output
Question about 57H81 57" Rear Projection Television
...convergence IC's? The IC's themselves are about $50.00 total convergence output IC problem. convergence board would have to be removed - remove and replace 2 STK IC's and check the surrounding ...
...double picture and the colors are off. When trying to auto focus the blue lines are wavy. Replace Convergence ICs ,Big black ICs will have PN# on them example STK 392-110 Mats has ICs
Usually answered in minutes!
405 Questions
364 Questions
299 Questions
263 Questions
243 Questions