Questions & Answers for: convergence grid tilted

...convergence (was ok) and even looked at the "secret" grid but was not able to tell if anythign was off on the grid. It appeared to be OK. Is there anythign else that would cause the color to be ...

...convergence grid Hello, Thanks to Premtech for the good advice. Greatly appreciated. It was suggested to use higher wattage amps. I did this and tv looks great. What im woderning now is if any idvice ...

...convergence, the white grid initially appears fine and in sync. After a few seconds the red will appear below the white grid lines, then after about 5 seconds it merges back into the white grid lines ...

grid he had? If not, would it be next to impossible to adjust the convergence or just a little more complicated yet do-able. Thank you. The grid (called an overlay) is put in place to fine-tune one of

...convergence the green grid is drastically skwed. I remember a repair guy adjusting these once but i can not figure out how to get to the menu to alignn the gun to sqare the grid up. any help is ...

...CONVERGENCE MENU GRID- GREEN GEOMETRY- CANNOT MOVE LINES RUNNING TOP TO BOTTOM- CAN ONLY MOVE GRID LINES RUNNING SIDE TO SIDE-PICTURE HAS SIDE HOURGLASS- ANY HELP Corrupted convergence E-Prom. Full ...

...convergence Adj Grid is centered on the screen. Convergence if fine at the center but way off at the top and bottom. How do I get the grid to adjust the top, left, right and bottom of the screen> ...

...convergence grid on the screen----you will see a grid of lines and just need to look at them----if red or blue is out of place you have a convergence problem--very common on this kind of set. If set ...

...Convergence Grid Tilted A Little... It seems the entire Convergence Grid on my TV may be tilted slightly to the left. Is there a way to manually tilt the grid to the right just a hair and then align ...

...convergence grid but are equally spaced, with the outer ones at the ends of the central lines. 12. Cut off about 1/4 inch from the right side of the sheet so that the sheet can lay flat against the ...