Questions & Answers for: Aqua controller pad

My Aqua logic chlorine generator reads "cell power error" "chlorinator off". I have checked the generator and it is clean and free of deposits. Fuses in the box are not blown. I can kill the power by ...

my new system reads no cell power 2 ? any help check voltage to cell

goldline controls 066008g-1 no power to the Turbo Cell control board or power supply if salt ok check sensor and cell and cord to cell

Clorinator off no cell power. This is what my AquaLogic is giving me. I can trip the breaker and it goes back to telling me what the salt content is for about 2 cycles then it kicks back to this "no ...

Savannah Spa Sunset Dlx control pad doesn't respond I own a Savannah Spa Sunset Dlx from 2002. The control pad does not respond to my touch all of a sudden. When I shut the power off for a while and ...

on an Aqualogic PS 8 I am getting power to the "filter" terminal block on the "line" side but nothing on the "load" side and the display unit does not come on. I have 2 actuators installed and am ...

...help. I changed the 9V battery on the outside equipment. check red 4 pin plug if ok check wires to controller if ok bad PCB ...

goldline control 066008g-1 high amp error bad transformer check cell see if calcium if so shorting out

I have a Aqua Rite Electric Chlorine generator goldline Control the flow lite is on and the generator light is not on what could it be the flow switch check salt level with pro if ok check sensor

When I plug in the top spa controller the entire thing lights up and stays lit. Do I have it plugged in wrong? I could use some help. It a aqua hotline series hl2000. either controller for spa bad or ...