...control panel on the front does not light up, nor does pushing any of the buttons work I disconnected the LED control panel and made sure the connections were all reconnected tightly and tried again ...
danby model DPAC10061 Just bought this air conditioner. I don't understand the instructions for setting the desired room temp. Any advise. I can't find my manuel and when turning on my a/c it will not
...open or close vent , how should i adjust them to get maxium cooling? Close the vent for maximum cooling. When you open the vent it opens a panel to the outside air and the unit cools less
...control panel The control panel is never illuminated. Now my AC is not working and when I push any boutton it does not show the message because it is dark. This is a circuit board problem. If this ...
contol panel is not working, is their a way of restting panel or does it half to be replaced the control board has to be replace im sorry.
...control panel for 3 seconds until the ionizer indicator light activates/deactivates. I haven't tried it yet (I'm at work) but I'll give it a shot when I go home. Hi All, I went to the machine and ...
Question about DPAC90061 Portable Air Conditioner
...control that goes with it.I have a problem understanding the icons and setting for the AC. There are 8 buttons on the panel, but what's their functions and how do i program it. ...
Question about DPAC120068 Air Conditioner
...air blower and the control panel is always illuminated. check the delay switch. The compressor cycles but the fan never shuts off in "cool" mode. The control panel always glows blue when plugged
Question about DPAC120068 Air Conditioner
but will not start The unit's control panel lights up but will not start with when using the remote control or trying to turn on the unit at the control panel. What model Danby air conditioner
Usually answered in minutes!
2,517 Questions
1,056 Questions
713 Questions
416 Questions
354 Questions