Questions & Answers for: Precor control deck

...deck or belt or both! What is starting to happen is that at the higher speed the unit is starting to draw more current, so the motrol control board will sense this and will shut down so it won't ...

Ad

Question about C954i Commercial Treadmill

1 Answer

...treadmill was operating at speeds above 1 mph. Power bits indicate the relative time that the motor controller drive circuit is turned on. Power bits is an indication of the amount of power the load ...

Ad

...because the walkbelt and deck are not properly lubricated. I would recommend replacing the motor controller,walkbelt,deck and applying .5 oz of lubricant on the deck every 3-6 months or 100 hours ...

...treadmill was operating at speeds above 1 mph. Power bits indicate the relative time that the motor controller drive circuit is turned on. Power bits is an indication of the amount of power the load ...

Question about C966i Treadmill C 966i

1 Answer

...was operating at speeds of 1 mph or less. Power bits indicate the relative time that the motor controller drive circuit is turned on. Power bits is an indication of the amount of power the load ...

Question about C962i Treadmill 220V

1 Answer

...was operating at speeds of 1 mph or less. Power bits indicate the relative time that the motor controller drive circuit is turned on. Power bits is an indication of the amount of power the load ...

Question about C956 Treadmill with Cardio Theater Option (Used)

1 Answer

...treadmill was operating at speeds above 1 mph. Power bits indicate the relative time that the motor controller drive circuit is turned on. Power bits is an indication of the amount of power the load ...

Question about 9.21 Treadmill

1 Answer

...deck may be two sided and be flipped) is a lot less than eating the lower power control board and/or a drive motor. Also, do the drive belt while you are doing the run belt. Don't scrimp on that $40 ...

Question about 9.35 Treadmill

1 Answer

precor 9.33 smells A few questions? How old is your treadbelt? Has the deck/belt been replaced? If belt/deck was replaced, check controller and drive motor

Question about 9.35 Treadmill

1 Answer

...treadmill was operating at speeds above 1 mph. Power bits indicate the relative time that the motor controller drive circuit is turned on. Power bits is an indication of the amount of power the load ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Precor Exercise and Fitnes Experts

Sportsmith LLC
Sportsmith LLC

Level 3 Expert

920 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a Precor Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...