...constantly have the receive mode on. Anytime yoy try to transmit from one of them or from any other of the walkie talkies, it transmits a loud static until you push a button. The only thing different ...
receiver goes into protector mode My receiver (SONY STR-DE635) is in constant protector mode, even with nothing connected. Could it be the power supply? Nope, power supply it would not even power up. ...
Question about STR-DG600 Receiver
...Sony STR-DG600 Receiver constantly goes into Protect Mode when using FM or XM. Check to see if the antenna is firmly connected and not making contact with the receiver chassis or other
...mode? Do you hear the power relay switch clicking constantly, or does it just click once and turn off? In any case, it could be a faulty power relay. I just sent in my TX-SR806 for warranty repair ...
Question about KDC-138 FM / AM Receiver
Everytime I turn on the truck my kenwood kdc-138 goes into standby mode How can I get it to stop going into it I turn on the truck and all my settings are restarted? How can I fix it? You need to wire
Question about KDC-138 FM / AM Receiver
...mode on it. It works great, but just annoying to have the display blink constantly. So does anybody know how to do this. :0) Press the "home" button on the remote, down left for the arrows. Then go ...
protect mode constant Protect mode will not clear by any method advertised. Can this be repaired at home? doubtful, protect on a sony receiver usually means there is a short in the amp section
Question about Ht-6600dp Home Theater In A Box
...wont work manually and when it is turned on by remote or sometimes manually if it will work ...it constantly flips though all the modes on its own fro when air conditioner is running it constantly ...
Question about Ht-6600dp Home Theater In A Box
...receive mode. Some models have a busy channel lock out, that if it beleives it hears something it will not let you transmit over the other station. It is likely experiencing constant static because ...
Question about Ht-6600dp Home Theater In A Box
...receive. Rd is always showing and static coming from the speaker Adjust your SQUELCH control or setting so that the noise disappears. The RX indicator will go out. It is likely experiencing constant ...
Usually answered in minutes!
980 Questions
644 Questions
497 Questions
317 Questions
274 Questions