Questions & Answers for: connect ps2 together

...ps2 then when you switch it off make sure it is unplugged the gently push the laser back to the start position witch is in the middle then put it back together and try again at loading your gam if ...

...PS2 to see the connector under the cd drive right side. This is done by removing 4 screws. Two are on either side of your Controller ports. Another one is located between the fan and power block. ...

...ps2 to usb adapter. Try using it and see what happens. I would also change the batteries. Does the keyboard start working again after hitting the connect buttons (bottom of keyboard & on the ...

...ps2 apart and mostly put it back together, but i have this one metal piece with a hole through it , like a metal plate not sure but think it connect somewher near the reset and start button. go to ...

ps2 fat I pulled the top off and the wire connected to the top (to the power button) pulled out. I put it back together and have no power. When you ripped the top off, you must have loosened a ...

...PS2) and cleaning the CD laser doesn't work and everything's connected together well then you may need to tune/align the CD laser. Just go to Lycos.com and type in 'PS2 laser alignment'. My favorite ...

Connect PS1 and PS2 for multiplayer game I am trying to play a red alert and I have a PS1 and a PS2. I know you can play multiplayer with two PS1's but can you use a PS1 and a PS2? If so how do you ...

...PS2 apart to clean the lense becaus it wasn't reading discs properly and when I put it back together I got nothing. No red light, no green light, no power whatsoever! Please help! be sure that the ...

I have changes the ps2 laser, but now when I put it back together the disc will not turn ok did you connect everything up properly in that case

...connect my ps2 to laptop with the help of notebook expansion base? Ok, so i have hp compaq nx9110 laptop, its notebook expansion base and a ps2. I was wondering could i connect the ps2 to laptops ...