...connect to your pc to install all the codes for all your devices by just telling the software what tv dvd player etc you have. and unlike most universal remotes it will control everything at once ...
...connect the DVD player to a television is via Audio/Video connections that are usually supplied with it. Next plug in your DVD player and power it up. Next use your remote to select AV 1, 2 or 3 or ...
...connect a DVD player to the TV, observe if there is going to be sound. If there is still no sound after connecting the DVD player to the TV, proceed to the next step. "The reason why I asked you to ...
TV has a DVI port, get an HDMI to DVI cable (again M/M). For this option, you will also need to connect the audio cable (see below in the composite or component video section). Alternatively, this Blu
...Connect a DVD or something else to one of the rear audio/video inputs to see if set works that way.2. Check to make sure set in menu is set to tuner and cable---if the tuner in the set is bad a ...
...before you do that is to see if a DVD player etc alone connected to rear inputs on the TV works or not--if it works the issue is in the line going to the tuner in the TV--box reboot might cure
...TV or the source? Does it do this on all inputs? try attaching DVD player. Be sure all your connecting cables are good & installed all the way on both ends. if still have issue, may be your Main ...
it to work. It says "No Signal" It does work on other TV's in the house. How To Connect DISH DVR to DVD VCR then to HDTV Watch this video to get more details. http://electronicshelponline.blogspot.com
Question about FLX3210 32 in. LCD TV
connect a VCR player and a DVD player to my Samsung TV. These units are separate units. try this website: http://tv.manualsonline.com/manuals/mfg/element_electronics/flx3210.html# then see page 12 for
Usually answered in minutes!
194 Questions
156 Questions
51 Questions
56 Questions
53 Questions