Question about ZSR0104CP (zsr0104cp) Router
...computers in my network places with zonet router I have two computers both windows xp and a printer connected to a zonet router (zsr0104cp). I am able to access the internet from both computers. I ...
...the router. Does anything have to be setup. The store I bought from says no. If the router is connected to the internet then you just have to setup a new internet connection from Network ...
...connect the computer to the modem, it works. but it does not work with the router. You will need to check the settings of the router. For this you will need to access the router set up. Your ISP is ...
...connect the computer directly to the modem, does it work ? If that works then the modem is working. Now connect the computer to the router and the modem to the router . You will need to open the set ...
...connect with Hughes Net Moden HN7000S Router connects fine with computers via both ethernet & wireless, but I can't get on the internet through the Hughes modem. The Hughes modem works fine when ...
connect the main computer to the router and comcast modem to the router. open the set up page and Clone the MAC address of the " Main " computer. power cycle the modem and the router. See if it works.
lost connectivity after power outage After a recent power outage, I lost connectivity to my printer. The printer itself is fine, I can print when connected directly to it, but I cannot print through ...
Question about ZFS3008P 8x10/100 Mbps Networking Switch
...connect more than one computer using this switch than you need to connect a router in between modem and switch modem -- > router -- > switch -- > computer from your modem an ethernet cable ...
Question about ZSR4154WE 80211N Wireless Broadband Router (830762003403)
computer. Connect your router to your modem in one of the two following ways: If you currently have a computer connected directly to your modem: Unplug the network cable from the back of your computer
...Try unplugging the power from the kvm is powered, if not turn off both computers and unplug all connections for 30 seconds and then connect it all back and turn on both
Usually answered in minutes!
21 Questions
22 Questions
15 Questions
17 Questions