Questions & Answers for: connect behringer amp guitar

...Connect either of the XLR DI output of the Behringer directly to a MIC IN channel on the Powerpod using a standard Microphone cable. If you wish to push a stereo sound then connect both(L + R) of the ...

behringer 393 in white and I don't know a whole lot about guitars but my boyfriend seems to be ready to throw it into a wall because he just got a new pedal for it and when he hooked it up to his amp,

...connect to the same receptacle or plug strip. Any phone lines should be disconnected from the laptop. Make sure everything has three wire cords. The interface probably sends out line level, so you ...

my guitar wont connect through the behringer with my amp :( Check battery and or power adapter and that the input and output cables are not backwards.

...These amps have a few issues. I would take to a tech, and go over many of the poorly soldered connections on the circuit

...hear that channel. We need more information about how you are using this... specifically what is it connected to and with what type cables... You MUST use balanced lines either XLR or TRS cables. You ...

...connect my Marshall guitar amp to the mixer which is connected to the laptop for recording and to the speaker You can only do this with a LINE OUT of your amplifier, or HEADPHONE out, as these are ...

connect guitar have you checked the speaker leads in the back to make sure they are hooked up> if so, you have power to amp? Volume knob turned up? is guitar cord good? (try it in a different amp ,

...connect eurolive vs1220f? iv tried plugging my guitar into the jack but there is no on/off switch and i dont understand how it switches on! Hi I'm sorry if this isn't going to be as helpful as we ...

...connect a pair of F1 Bose 812 speakers and Subs to a Behringer PMP6000 mixer? Church trying to upgrade sound so got a pair of F1 Bose 812 speakers and Subwoofers. I am completely new to this so will ...