Questions & Answers for: Dodge Intrepid conect remote wire amp

Question about 2001 Intrepid

1 Answer

seensor oxigeno not conectted There are four of these, located on the exhaust manifolds, two on each side. Check the wires and plugs to make sure they are plugged in, and that the wires are not melted

Ad

2000 Dodge Intrepid won't shift out of 1st gear For the past year the revs occasionally jumped when going around 60mph, especially when driving on uneven roads. I haven't been driving the car for the ...

Ad

...amp; how do I fix it. There was a wire attached to the trunk lid on the drivers side that was attached by a clamp. It looks like this sm. clamp was rubbing on the wire eveytime the trunk was opened ...

...amp; the remote start stopped working after my wife killed the battery while trying to start it in very cold weather.took me awhile to get it started,boost & batt.charger at same tie.door locks ...

...remote ground post Starter-to-engine/transaxle nut and bolts Positive battery feed wire from the starter Starter and position it to gain access to the posi-lock connector Place a support under the ...

...remote ground post Starter-to-engine/transaxle nut and bolts Positive battery feed wire from the starter Starter and position it to gain access to the posi-lock connector 2. Place a support under the ...

...remote starter switch or a jumper wire between the battery positive post and terminals 87 of the starter relay connector. If the engine cranks, the starter and solenoid are OK. If the engine does not ...

pulled up to a light and the check engine light came on i checked all the fluids and visable wire conections and the check engine light is still on normally engine light is emisions related (02 sensor

when i turn the lights on they go off and on repeatedly The chances are, you have a very loose conection some where in your wiring or the switch is faulty (replace this first) its the easiest to check

...conect the wire harness that i bout for my after market stereo i wasnt able to use that wire harness because there was no clip to clip onto in the car because the preveously owner of the car cut it ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...