Questions & Answers for: compressor wrong phase rotation

wrong direction of rotation I need to change from CW to CCW on an A O Smith 5 hp 3 phase type MOGB on a 184T fram motor. there are 12 wires that tie to 3 and 3 are tied together. what3 wire need to ...

...wrong value capacitor or connect a hard start capacitor to an already bad start dual cap. Case in point: I come across a condenser where the fan motor is running (in the right direction, up) but the ...

compressor wrong rotation 3 phase air compressor (Puma brand) wrong rotation: it turns anti-clockwise instead of clockwise rotation...Could it be the wiring? does switching any of the 4 wires from the

...our mechanic. If I bump the motor in the wrong direction will I get a face full of oil? no you wont just make sure not to run it backwards for any lengh of time bumping it is ok to check

...phase 240 volt motor that wont start without spinning the motor by hand. wont start without spinning the motor by hand. I have changed the start capactior One of the two wires from the capacitor is ...

...wrong with the unit? The internal bypass valve is stuck open or the crankshaft is broken, or the compressor valves have failed. I assume that this is a residential unit. If it is, the compressor is ...

compressor and you will find three wires there terminating in junction box, earth connect to earth (usually green or green with yellow stripes), then you have your neutral (usually brown or black) and

...wrong rotation of compressor. The 220 volt 1 Phase motor rotation can be changed. If this is a new compressor check to make sure all vacuum lines are tight and not cracked. The rotation error is ...

...compressor turning the wrong way. It also has burned out capacitor. One capacitor start or run? It's the smallest one and has the burned numbers off. Would this make motor turn wrong direction? ...