...open the space between the discs and spray with canned or compressed air. The stuff should come out. Do the tension test again to make sure you got everything and then try sewing again. ...
...compressed air to blow out their machine (compressed air is notorius for blowing lint into other areas of the machine) I have also seen the odd plug end swell because customers use harsh cleaning ...
...compressed air to clean out my Bernina? The needle is getting stuck when I try to use the decorative switches and I thought maybe everything was just too dirty. It is okay to use and can I use any ...
...compressed air when the presser foot lever is lifted in the up position. In some cases, soft drinks and other sticky or corrosive liquids can find their way between the disks. In this case, the ...
Question about Bernette Deco 600
...compressed air is advisable in the hook and bobbin case area. Over the years, it has been found that over lubrication is more harmful than under lubricating Bernina machines. ...
Question about Bernette Deco 600
...a caveat, but is generally recommended to NOT use compressed air to clean sewing machines. Frequently, it pushes the lint and dust further into the machine so a technician will have to clean
Question about Bernette Deco 600
...compressed air and let the machine sit for a while until all of the solvent has evaporated. ( I can provide a short list of cleaning agents by way of request) The removal of lubricant on this slide ...
Question about Bernette Deco 600
...compressed air until mostly dry. Use safety glasses and ear muffs for safety sake. Add a class 68 machine oil to each eccentric as well as the cam and fork of the top knife arm. Run for a while until ...
compressed air. Check for any visible damage, such as cracks or chips, and replace the bobbin case if necessary. Incorrectly inserted bobbin: Make sure the bobbin is inserted correctly into the bobbin
Usually answered in minutes!
64 Questions
435 Questions
168 Questions
165 Questions