Questions & Answers for: Raymarine compass repair

Raymarine C 80 Head up problem C 80 will not work in head up mode. I calibrated my autopilot compass and that resolved the problem. My auto pilot compass was about 100 deg out. Once i did this the ...

...other day it fully extended the arm and now it just 'clicks' and will not respond to turning the compass rose. Is there a fix I can do myself. I doubt it's worth sending for repaire. If not; am I ...

...reply we are working on raymarine co. but they say we must go through Porrtsmouth(we are in NZ) The compass hdg is awol, the rest seems okey dokey The prce mentioned was retail sx10, I was told the ...

...unit and check if freezing persist.If not check drive motor and cable. If freezing persist and compass is ok the control unit is faulty. Verify if the compass reading is ok in four directions on ...

...unable to get throught the calibration mode to set deviation. Our boat dealer mounted the fluxgate compass within 18" of the emgine which was too close. I was unable to get to the compass so I ...

I installed a Raymarine compass sensor in a GRP sailing boat underneath the chart table at least 50 cm away from metal and magnets. It is connected to a SP X-5 computer unit and a ST6002 autopilot ...

Smartpilot X10 no comp error When X10 start, show Stand by and bearing 000. Them show "no comp". Its no compass? yes no compass

Hi I have a raymarine c120,dose the hiden electronic compass have a reset button,when following a track on screen im am traveling sideways or a stern,,,do I need a new one or reset,?? Do you have the ...

raymarine smartpilot x-5. The fluxgate compass is some 45 - 60 degrees out from the boat compass. I have tried to recalibrate but this does not solve the problem. Any ideas? Fluxgate compass will not ...

St40 autopilot unreliable. Fluxgate compass may also not work ou will need professional repair services to work on the fluxgate compass.