Question about MultiPASS F20 All-In-One InkJet Printer
...Wrong Cartridge error msg" - not new but hardly used Hi, We have had this printer for about 3-4 years, but it has not had heavy use. Mostly black and white, some color...usually Draft mode, very ...
...wrong cartridge i know the right cartridge is in a) Verify the right color cartridge is in the right slot. b) Verify that the cartridge is fully inserted (Press on front of cartridge) top gently to ...
Question about MultiPASS F50 All-In-One InkJet Printer
...wrong cartridge". tryed reinstalling cartridges and head, reset, turned off/on, no change. remove all cartridges leaving printhead intact. close cover, turn off turn on, let power up, error message ...
...color ink cartridges in the wrong places. Take them out and run a whole bunch of head cleaning routines. I'd expect the wrong colors for a while until the incorrect ink has been flushed out. Check ...
Question about MultiPASS MP700 All-In-One InkJet Printer
wrong cartridge. I have bought 3 different cartrdiges so I don't think that is the problem. Do all of the colors need to be replaced in order for this to work? But in the past I have just replaced the
Question about MultiPASS MP700 All-In-One InkJet Printer
...an issue with the ink cartridge: purchase new cartridge and replaced black. Still in window. All colors are new and always use the cartridges made for this printer: no generics. (Canon 3e) Problem ...
Question about MultiPASS MP700 All-In-One InkJet Printer
...color) and reinserted the cartridges again. Left the printer off for a few days. When I turned on printer , It warmed up and the wrong cartridge message was gone and I was able to print again. Wow! ...
Question about MultiPASS MP730 All-In-One InkJet Printer
keeps displaying wrong cartridge and wont print HI check the code of color tank and replace it correctly if does not work clean the flat that stick on tank
the orange alarm light keeps flashing and wrong cartridge keeps showing up hi. how can i solve this problem? ijust put niew colors and it dosent work .thank you mimi
... by following the instructions below: 1. Use a clean, dry, soft, lint-free cloth. Locate the copper-colored circuitry strip on the back of the cartridge. 2. Wipe the copper-colored strip with the dry ...
Usually answered in minutes!
427 Questions
315 Questions
121 Questions
111 Questions
109 Questions