Questions & Answers for: collimate binoculars

Question about Classic 524006 Binocular

1 Answer

How can I realign my binoculars? if collimation of binoculars is out ,you would certainly want to use a collimator to fix it,only repair shops have them,and to mess with a nice glass like the zeiss ...

Ad

Question about MAGNACAM Binocular

1 Answer

...binoculars out of alignment The East German Notarems were a little fragile when compared to their West German counterparts. They didn't require too much of a knock to get them out of alignment. To ...

Ad

Question about H2O 13-2412 (12x42) Binocular

1 Answer

double vision Hi, I have a Bushnell 13-2412 binoculars, the problem is double vision I'm assuming you have set the dioptre correctly for your eyes. Normally this is caused by a collimation error when ...

Question about InstaVision Binocular Binocular

1 Answer

BLURRY WHEN YOU LOOK THROUGH THEM THERE ARE TWO DIFFERENT ANGLES WHEN YOU LOOK THROUGH THEM. ONE SIDE IS HIGHER THAN THE OTHER. WHEN YOU LOOK THROUGH THE LENSES DO NOT MIX TO MAKE ONE CLEAR PICTURE. ...

no apparent exterior damage but now my nikon's have "double vision" clear on each individual tube but doubled vision when veiwing normal. any suggestions? The prisms have shifted inside of the ...

Question about Custom 61-8361 (8x36) Binocular

1 Answer

seeing double image . baush and lomb custom 7x32 The binocular is out of collimation. They need to be sent to a qualified binocular repair outfit that can return the barrels back into alignment.

Question about Custom 61-8361 (8x36) Binocular

1 Answer

I have a set of Steiner Military Marine 7X50 binoculars and now they don't seem to be focusing "together" If you look through one eye cup it looks fine, same as the opposite side. But when ...

Question about Classic EZ (7x35) Binocular

1 Answer

I dropped my binoculars and now the images are out of allignment. Can I fix them? not possible without a collimator..suggest pro look at it g.l. [email protected]

Question about Classic EZ (7x35) Binocular

1 Answer

...binoculars have an eccentric ring around the lens under the clamp ring so that can be done. Your Tasco probably does not have that, so look under the covering material on the barrels (it may be stuck ...

Question about Fujinon Techno-Stabi Binocular

1 Answer

dust removal inside fujinon techno-stabi binocular The case has to be opened for this, and a can of compressed air used. There is the risk that the binocs can be knocked out of collimation, so you'd ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Optics Experts

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66967 Answers

Tony Parsons
Tony Parsons

Level 3 Expert

6405 Answers

Are you an Optics Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...