No cold water on cold settings When I set the washer on cold/cold the clothes feel warm when they are finished with the washing cycle. Try switching you hot cold inlets to the washer on the back....If
... Check each temperature during initial wash fill. Set to hot water, is hot water coming out? Set to cold water, is cold water coming out? The rinse cycle is cold only. If cold water is not working ...
water intake when the water starts to fill the washertank it stops and switches from cold to hot. even when you adjust the slector switch it still doesn't follow what ever the slector switch indicates
Question about Ultimate Care II LSQ9549L Top Load Washer
...doesnt work, switch to warm and warm comes out. Whirlpool washer has four selections: hot wash,cold rinse; cold wash, cold rinse;warm wash, warm rinse; and sensor cold wash, cold rinse. hot
Question about Ultimate Care II LSQ9549L Top Load Washer
washer is starting in mid cycle and not filling with water Check to see if the cold water selenoid works on washer. You can do this by turning the switch to cold/cold. It sounds the cold water side ...
Question about Ultimate Care II LSQ9549L Top Load Washer
Whirlpool washer new..,. washes cold wash cold rinse.. hot wash cold rinse.. but on warm wash is cold wash cold rinse I can send wasdher back just got it t0 day or is there something I can do? Be sure
Question about Ultimate Care II LSQ9549L Top Load Washer
cannot get cold water to come into the washer I have a whirlpool washer and the cold water will only drip into the washer. I can only get very hot water to come out. When I put it on warm or cold, it ...
Question about Ultimate Care II LSQ9549L Top Load Washer
I have a model WFE1070BD*CD,(5 months old) does this machine use cold water ? Both hot and cold taps were connected at installation but on delicate wash clothes are still very hot . Check the hose ...
Question about LTE5243D Top Load Stacked Washer/Dryer
no cold water on cold/cold or warm/cold setting Try shutting off the hot water valve on the plumbing and start the washer with a warm water setting. If you get no cold water, check to see of the cold ...
Question about Ultimate Care II LSQ9549L Top Load Washer
washer will not run on cold cycle. It will run on hot or warm/cold - only fills with hot water. Whirlpool LXR6232EQ Top Load Washer - no cold water on the cold/cold or warm/cold wash cycle settings, ...
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,413 Questions
1,373 Questions