...I have a problem with the automatic temperature control. Here is the problem. If I select cold/cold, I get hot water for wash and rinse. If I select ATC cold/cold, I get hot water for wash ...
Question about Neptune MAH5500B Front Load Washer
Cold water valve won't turn on to fill washer When calling for cold water wash only, no cold water comes into wash machine. The cold water valve in the washer won't open. Hot water valve works fine, ...
Question about Ensignia 3.3 cu. ft. Top Load Washer
maytag ensignia washer...cold water settings i have the maytag ensignia washer...none of the cold water settings are working...i have cold water coming through to my laundry tub sitting next to the ...
Can't get anything but warm of hot water In these economic times want to save by washing cold! If you set the washer for cold wash with a cold rinse, no hot or warm should enter the machine. If any ...
Question about Atlantis MAV6000 Top Load Washer
...washer to new house, and now it will run but only with hot water. put washer on Auto controll, and cold cold or warm cold setting, and it wont even turn on. Have you tried checking your cold water ...
Not getting cold water Cold water will not come when set on cold/cold. As long as the water valve is turned on.....most likely you need a new water control valve. This valve turns on the cold water ...
Possible Mixing valve Problem On "Warm/Warm" water setting, water is cold. On "Hot/Hot" Water is hot. Mixing valve bad? Recently had hot water heater replaced. Trash in line blocking valve? I would ...
hot water when cold is selected Wife says hot water only no cold. Selectedd cold / cold and machine fills with hot water. ""Selectedd cold / cold and machine fills with hot water."" Is your machine a ...
Question about Neptune MAH5500B Front Load Washer
Cold/cold wash uses hot water wash and warm rinse. I have t set to hot/cold wash to get cold water wash. probably the water inlet hoses are hooked up cold water line to the hot water inlet and vice ...
On our Model LAT9635AAE washing machine when cycle is on cold/cold the water fills at a very slow flow. If (while water flowing on cold) the water temp switch is switched to warm and back to cold the ...
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
680 Questions
658 Questions