Questions & Answers for: cobra cb radio meter stays

Cobra 18 wx st cb problem I recently installed this cb in my 1999 ram witha new single whip antenna from radio shack. The problem is in cb mode nothing happens. The signal strength bar stays with only

...cobra 200 can i get a replacement light at radio shack for my meter ..do you no what there part number would be?..thanks ..David The meter uses a fairly standard 12 volt mini amp, I don't know if ...

...meter on the front of my radio is stuck. any idea on how to free it up? Passing a small magnet in front of the meter may be enough to free it up. It may, however, be an indication of a problem with ...

I would like to know which pod in radio adjusts each meter function on cobra 29. vr5 is tx meter. and vr 1 is rx meter.

Cobra cb radio backlight inoperable The backlight behind the control knobs and meter isn't working, the LED display for the channel works and the dimmer switch still operates the LED look ...

cobra 148 gtl-st wont transmit but receives great receives great on am and usb/lsb but will not transmit on any mode and also no pa output. needle on output meter stays on o when attempting to ...

swr meter on cobra 29 classic keeps moving while dead keying Why does the swr meter on my cobra 28 ltd classic bounce back and forth while trying to calibrate the meter do you have it on calibrate?

...cobra 29lx. Everthing works fine except for the SWR meter. Can't use the meter to adjust SWR. No matter what I do the meter stays the same. Sent to factory but they said nothing was wrong. Hooked ...

has any information as to what each VR# pot changes on a Cobra 29 LX LE (Cobra 29 LTD board) vr1 "s" 9 setting on the tx meter vr2 voltage setting vr3 squelch vr4 amc vr5 p4 display on tx signal meter

...cobra 1000 gtl Powers up,meters stuck, no rx just static, All lights work, A mic will Key the on the air light, have you checked the voltages inside the radio?If you have to much or to little it will ...