Questions & Answers for: cobra 29 ltd classic wiring

cobra classic 29 ltd When i hook up my cobra classic 29 ltd it shows me the channel but i dont hear any static or people talking. Also when i key up the needle dosent move and the light to show the ...

cobra 29 nw ltd classic the ch19,ch9,normal switch quit, can i take two of the wires off and wire together to make it work normal. thanks Yes but be careful

where to get a free wiring schematics for a cobra 29 ltd classic need to know about a circuit board also www.cbtricks.com

...Cobra 29 LTD Classic CB http://xbones_antennas.tripod.com/id21.html I found the diagram here http://www.cbtricks.com/radios/cobra/29ltd_29ltd_st_29wx_st/graphics/cobra_29ltd_sm_sch.jpg Hope it helps ...

...Cobra 29 LTD Classic the 4 wires soldered inside the radio to the Mic jack are broken off Cobra 29 ltd classic , unskewing the Mic twisted and broke lires off inside radio CBTricks Radio Info check ...

were do i connect the blue wire from the rfx 150 into the cobra 29 lx didn't you get direction with it for installing it in a 29 lx?

polarity protection diode d23 d28 classic Where are they located d-23,it should be the only diode in the area of the red and black wires

...Cobra 29 LTD Classic that I changed the on, off. volume, squelch knob. At first it worked but shortly the receive and squelch died. I took the wires loose and the squelch as well as the rest I have a ...

Cobra 29 LTD Classic I believe to wire a Sadelta M3 microphone to a Cobra 29 LTD Classic CB radio: The Sadelta M3 microphone has four wires: white, shield (bare wire), red, and black. The Cobra 29 LTD

...Cobra 29 LTD Classic Wiring a Delta M3 microphone to a Cobra 29 LTD Classic CB radio requires connecting the wires from the microphone to the corresponding pins on the radio's microphone jack. Here ...