Questions & Answers for: cobra 200 gtl cb radios

Cobra 200 gtl dx I can not get an Extreme 2018 mike to work on my Cobra 200 gtl dx. The talk back on the mike will not work and it is suppose to work on ALL cobra's. [email protected] Could the battery ...

cobra 200 gtl dx audio output this rig set for 2 months .in house.when tried to put it back in service has no audio output.receives well.any ideas.also have tried about 6 mikes Could be the jumper on ...

...Cobra 200 GTL The channel selector was kinda bend a little bit. When you turn a full 360 turn you feel some resistant. I continue using the radio for a while, into it LOCK UP in one channel. ...

Cobra 200 gtl dx will not transmit below 26.955 or above 27.405, but will xmit on cb freqs and 10 meters. Whats going on? First off, the 200 GTL DX is a 10 meter radio. Running it on 11 meters (CB) is

...cobra 200 GTL DX. On ssb the modulation is sounding like a can, so a very bad modulation. What can we do to get a quality modulation? Thanks: Gerard. make sure they didn't clip your mod resistor in ...

I have a cobra 200 gtl dx that has lost it'd rf output. Can you tell me who may repair these models? Do an internet search. there a few guys out there. Bells cb shop is pretty good.

WERE CAN I FIND A POWER ADAPTER AND ANTENNA FOR A 200 GTL DX NW COBRA RAIO We can order them Power cables. We have a few antennas instock or can order what you need. with the lowest prices around.

hi need to adjust the echo delay on my cobra 200 gtl dx ! Open your radio and, with a small flathead plastic screwdriver, adjust T713. Any other questions feel free to ask.

I have a Cobra 200 GTL DX and if i touch any of the knobs on the front the frequency goes crazy. then don't touch them

cobra 200 gtl dx only does 12 watts on high 12 watts on high 4 watts on low power Open radio up and adjust rv9for am fm high power or rv 14 for ssb for high power,do not use a screwdriver,a matchstick