Questions & Answers for: cobra 148 gtl recieve

Question about 148 GTL 120-Channels Base CB Radio

1 Answer

cobra 148 gtl I have purchased two of these radios,when i transmit on lsb everybody says i am distorted an unaudible.I took the first one back.The second one wont transmit on sideband.I use to love ...

Ad

cobra gtl ; it was modified years ago. for other channels . so when i had it hooked up years ago , as i do now, same problem. its not the hook up or antenna. because when isubsutute w/ another radio ;

Ad

Question about 148 GTL 120-Channels Base CB Radio

1 Answer

cobra 132 recieves good poor send cobra 132gtl recieves good send is very poor swr meter read - when keying the mic i would take it in and get a new diamond thats what it sounds like to me..

Question about 148 GTL 120-Channels Base CB Radio

1 Answer

cobra 148 gtl b no recieve it has carrier and modulation but no recieve,i test the pa system so its not the audio chip it has no ssb or am recieve,the needle in the meter is dead make sure that the rf

Question about 148 GTL 120-Channels Base CB Radio

1 Answer

...cobra 148 gtl took out of box no transmit or recieve radio has no transmit or recieve and is brand new don't see any obvious reason by looking on inside of radio. I know the 148 sound tracker had ...

Question about 148 GTL 120-Channels Base CB Radio

1 Answer

cobra 148 gtl older version it doesnt seem to be modulating cobra 148 gtl older version it doesnt seem to be deadkeying anything and only swings maybe 2 or 3 watts people hear me key up but cant hear ...

Question about 148 GTL 120-Channels Base CB Radio

1 Answer

...cobra 148 with ssb, about 6 months old, while i was away there was a storm, now the radio doesnt work , recieve or transmit, i also have a cobra 29 ltd that wont transmit but it will recieve. is this ...

Question about 148 GTL 120-Channels Base CB Radio

1 Answer

NEEDLE IS TO LOOSE TRANSMIT AND RECIEVE THE NEEDLE SLAMS OVER WHEN I KEY UP AND NEEDLE SLAMS ON RECIEVE turn the SWR/CAL/S-RF switch and set it back to S-RF

cobra 2000 gtl has no output on am but has recieve? works fine on ssb. final and driver replaced. could be a blown tx diode in am.you would be better off taking it to a tech and let him fix it then to

Question about 148 GTL 120-Channels Base CB Radio

1 Answer

uniden tech help have a uniden zachery t that wont transmit I have a a uniden teddy r that won't recieve.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1672 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Radio Communications Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...