Questions & Answers for: cmp sensor

CMP sensor provides camshaft position information which is used by the PCM for fuel synchronization. The CMP sensor detects the position of the camshaft. The CMP sensor identifies when piston No. 1 is

Ad

Question about 1997 Sable

2 Answers

CMP sensor connector next. 3. Remove the CMP sensor retaining bolt and remove the CMP sensor Now to install: 1. Clean the CMP sensor surface and ensure that the O-Ring is in place. 2. Position the CMP

Ad

...Sensor (CMP) on the 4.7L Vâ??8 engine is bolted to the front/top of the right cylinder head (CMP Locationâ??4.7L Engine). It is easier to remove/install sensor from under vehicle. Raise and ...

Question about 2000 Jimmy

1 Answer

...CMP) sensor electrical connector. Bolt and CMP sensor. To Install: Install or connect the following: Camshaft position (CMP) sensor and bolt. Torque to: 7 ft. lbs. (10 Nm) CMP sensor electrical ...

...CMP) SENSOR Removal & Installation CMP sensor is located on rear of engine, behind intake manifold. Before removing, note position of electrical connector on CMP sensor. Remove upper intake ...

CMP Sensor connector is damaged, open or it is shorted CMP Sensor signal circuit is open or shorted to ground or to battery voltage or 5v supply circuit CMP Sensor 5v supply circuit is open or shorted

...CMP) sensor electrical connector (3). Remove the CMP sensor bolt (2). Remove the CMP sensor (1). Inspect the CMP sensor for wear, cracks or leakage if the sensor is not being replaced. Installation ...

cmp sensor Limited to 2500rpm in all gears fuel pressure is high it should be 47 to 51psi it reads 60 Replaced cmp sensor and fuel pump pressure is still high 58 to 59psi and problem still present Its

...CMP) Sensor Performance Bank 1 DTC P0342: Intake Camshaft Position (CMP) Sensor Circuit Low Voltage Bank 1 DTC P0343: Intake Camshaft Position (CMP) Sensor Circuit High Voltage Bank 1 DTC P0346: ...

...CMP) Sensor - Intake Bank 1 (3) Camshaft Position (CMP) Sensor - Intake Bank 2 (4) Camshaft Position (CMP) Actuator Solenoid - Intake Bank 2 (5) Camshaft Position (CMP) Actuator Solenoid - Exhaust ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...