Questions & Answers for: Nissan clutch master cylinder

Question about 1993 240SX

2 Answers

clutch or master problem? i go to turn the car on and the clutch goes in all the way , it did turn on , i checked to see if it had clutch fluid ,added some and started to pump the clutch it got better

Ad

Question about 1992 Sentra 4 Door

2 Answers

...clutch slave cylinder on a 1992 Nissan sentra usually attached to your transmission just follow the line from your clutches master cylinder which is usually beside your brakes master cylinder look ...

Ad

...clutch master cylinder which is usually mounted on the firewall near the master brake cylinder. If fluid level is low, clutch won't work. Hope it's that simple. Let me know. alright, on a manual ...

Clutch master cylinder is leaking out of piston cup.Detach from clutch pedal, disconnect hydralic line, and remove 2 firewall retaining bolts or nuts and pull out. Replace clutch master and bleed line

...clutch master cylinder, (almost like a brake master cylinder without the reservoir, as the clutch master cylinder works off the brake master cylinders reservoir) the plunger in the clutch master ...

Question about 1995 Pickup

1 Answer

...clutch master cylinder and if it is full you will need to replace both the slave and master clutch cylinders. You can dop just the master cylinder but you will be doing the slave cylinder in a week. ...

Question about 1990 Pathfinder

1 Answer

...clutch, pedal went to floor, filled master cylinder and holding fluid but pedal is still on floor. What to do.... you need to inspect the clutch hydraulic system to look for a leak.check in the truck ...

...clutch, master cylinder or slave cylinder? first check to see if you have any fluid in the clutch master cylinder which is mounted by the firewall on l/h side of car. if fluid is inthere, follow the ...

...clutch master cylinder. It is smaller than the brake master cylinder, but should be very near it. The clutch master cylinder is about half the size of the brake master cylinder. Take the lid off and ...

...clutch master cylinder on the firewall. If it is full, you may have a bad clutch master cylinder or a bad slave cylinder. Open the bleed valve on the slave. If fluid streams out when the clutch is ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2005 Nissan Altima
2005 Nissan Altima

1,587 Questions

2003 Nissan Altima
2003 Nissan Altima

1,450 Questions

2000 Nissan Maxima
2000 Nissan Maxima

1,309 Questions

1995 Nissan Maxima
1995 Nissan Maxima

1,122 Questions

2002 Nissan Altima
2002 Nissan Altima

1,306 Questions

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...