Questions & Answers for: Chevrolet Cavalier clutch master clutch

...clutch, slave and master cylinders. Any help would be appreciated. get the hyd clutch system assembly complete and pre-bleed from the dealer the hyd clutch system assembly???? would that be replacing ...

Ad

Question about 2004 Cavalier

1 Answer

...clutch master cyl or the slave unit on the bellhousing. check both for leaks and replace as needed. Master will show seepage between unit and firewall... slave will have fluid under rubber dust boot. ...

Ad

...clutch and it has a small master cylinder next to the brake master cylinder, check to make sure it has enough fluid in it (if it is way low your clutch wont work right), it could also be a bad slave ...

...out. I replaced the master cylinder but that didnt work on my 98 z24 It is not the master cylinder but the small clutch cylinder on the clutch housing, Either by passing or you have air in the

...clutch master cylinder is a single bowl. Good Luck- Ned I am having the same problem, and have had the Slave Cylinder Fixed twice and the master once. For some reason its not as bad, but is still not ...

...clutch master cylinder, a line between that and the clutch slave cylinder (which is the third part). It works same as your brakes ...step on the clutch and pressure from the master flows through the ...

clutch master cylinder, or a bad clutch slave cylinder. You could eliminate the slave cylinder by removing the line and capping it off, and if you have a firm pressure on the clutch pedal ( don;'t try

...clutch master cillender is going out I loose preasure on my hydrolic clutch pedel. About how much will it cost for another master cillender and how do you change it? depending on mileage you might be ...

Question about 2004 Cavalier

1 Answer

...CLUTCH MASTER CYLINDER RESERVOIR SOUND LIKE ALL BRAKE FLUID LEAKED OUT.CHECK ALL HYDRALIC LINES FOR LEAKS TO BRAKES AND CLUTCH MASTER CYLINDER TO CLUTCH SLAVE CYLINDER.REASON NO PRESSURE AIR WILL ...

Question about 2004 Cavalier

1 Answer

...clutch master may be bypassing. If that's the case, you will need to replace the clutch master and check that system for other leaks or seepage. If your clutch is operated by mechanical means (either ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...