Questions & Answers for: clutch engauge

clutch sudenly not working .clutch lever tight when pulled in. but clutch not engauging Is it not engaging, or not disengaging? Does it just slip when you put it in gear and let out on the clutch? You

...they replaced everything for the cluch. WEhat shoul I check short of buying a manual. Check the Slave cylinder operation. If the gears engauge with the car off it is a clutch problem not the

Nissan Altima 1992 -AC clucth is not engauging after 10-12km . Start with clutch functions well,after 10-12 km cluch is not getting engauged,if we just tap slightly on clutch ,it enguges. -any one can

clutch will engauge and just what to jump out. i am not sure on this vehicle but it is usually right on the compressor.. no low pressure switch , transducer switch is sometimes the problem, its on the

...something froze up so that when clutch engauges it kills the engine try turning every thing by hand with engine off. engauge clutch and try to spin engine by hand my guess is bearing froze up or ...

it is like 2 sets of clutches are engauged in my 95 tahoe 4l60e transmission that I just put a master rebuild kit in reverse is not working, it is like 2 sets of clutches are engauged also with ...

clutch not engauging on hill starts smoke and burning oil smell sound like the clutch is done for, hence the burning smell. I know the clutch arms do seize up in the gearbox, give it some lube and ...

clutch is not engauging and wont go into gearr friends can help. check the clutch fluid, if empty fill and bleed clutch line, if its full check the clutch slave sylinder it might be seized, replace ...

clutch won't engauge now so I can't put any freon in it I even try jump start it from the low side nothing so I connect the clutch striaght to the battery still nothing. also check all

clutch pedal it makes a grinding noise and wont engauge in 1st or 2nd gear all other gears work fine the gear grinding noise is because the clutch plate is not fully disengaging and the input shaft is