...clunking noise and a bit of vibration when accelerating in 4th and 5th. Then today after driving the car for 10 minutes the vibration got worse and the noise in much louder. This is now happening in ...
clunking/vibration/squeling noise under the front end Today out of no where my car start making this rattling clunk sound on my way to town.(Its not consistent at all) Then on the way back after ...
...clunking, ticking and vibration Well you will have to have a vice and usually they arent hard to replace just a good hammer and a vice usually will do it once he takes the 4 bolts out of the rear of ...
Question about 2000 VN 1500 Vulcan Classic Tourer Fi
have a vn 1500 kawasaki meanstreak prob is gear change im gettin vibration when goin in to 2nd 3rd etc it was a nice clunk clunk when i got it now the vibration makes gear change difficult.had a look ...
...The fixed the problem and now the clunking noise and vibration on the passenger side is back. I need help. I have a clunking noise in the front of my 06 saturn vue , all front end parts are ...
I have a 2003 ford explorer,when the heat is on full power it clunks, my mechanic said its the fan in the unit. How much will it cost to replace? Ask your mechanic, he knows what the clunk is, we dont
...transfer case was bad and then I was told its not that. Any ideas? If the diffs have been changed,they may be a different ratio.That would cause vibration and clunking.Just a thought.Hope this ...
Question about 1998 Punto
punto elx clutch pedal is clunking and vibrating when i drive away You should replace the clutch kit ! The clutch disc is out of order because the pedal is clunking and vibrating. Probably also ...
Question about 2007 Liberty Sport
vibration when driving,clunks when putting it in gear or going to reverse, clunks when letting off gas and then pushing thottle again . ny ideas may need drive shaft universal joint bearings.... if ...
Question about 2007 Liberty Sport
...vibration and clunking can be the drive shafts universal joints if its not clunking off the ground this is because there is no torque on the shats. this pressure is put on when moving the vehicle the ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions