Questions & Answers for: clunking noise 4 wheel drive

Question about 1991 S-10 Blazer

4 wheel drive stopped working

...clunking noises in the front, now or before when or not in 4 wheel drive? If so sounds like cv/axle shats/joints. Last time you used 4 wheel, was there a big clunk, just once? Is there an ocasional ...

Question about 2002 Silverado 2500HD

1 Answer

2003 chevy silverado 2500 HD when ingageing 4

...noise I had a similar problem and had to have the 4 wheel drive serviced. It need new grease. the grease i had was old and it was causing the gears not engage cleanly thus causing the grinding sound ...

Question about 2003 VUE

1 Answer

Dear sir yes i ment cv joint & no it does

...had vehicle up on safety stands had someone rotate wheels forward & backwards the clunking noise appears to be coming from axel end in transmission housing CLUNK NOISE YOU HEAR IS WORN CV

Question about 2003 S-10

1 Answer

I have a 1998 chevey

...blazer that is 4 wheel drive it makes a humming noise from the rear end and now is starting to make a clunking noise when i speed up to about 45 what is it like a drive shaft or your ...

Question about 2001 L 200

1 Answer

Clunking noise whilst in 4 wheel drive

clunking noise whilst in 4 wheel drive whilst driving in 4 low and high i seem to have a loud clunk noise like something slipping its fine in 2 wheel drive check your front drive shafts

Question about 1999 RAV4

1 Answer

Clicking noise clunking axle

noise clunking axle When coming out of reverse to drive and turning the wheel it makes a clunk sound this is hands on deal., get a real mech to do this, can be great danger driving and the finding too

Question about 2003 Sierra 1500

2 Answers

Transfer(transmission?) clunking when in 4/4

clunking when engaged. It is a push button setup with a vertical ladder.The noise is a little quieter when in automatic 4 wheel and louder when in the 4 wheel setting. The noise is non existent in the

Question about 2000 B-Series

1 Answer

My truck started making a bump noise driving home from work today and I could feel it underneath in the middle of the truck. It did it every one-two minutes. It has never done it before. What is it?

...drive shaft to the rear wheels. Could be CV Joints on the front wheels. Could be engine mountings. You need to get it looked at. I did find this Mazda & Ford Ranger rear end noise cure? - YouTube ...

Question about 2000 B-Series

1 Answer

I have a 2012 Mazda 2. Sitting on the road and turning the steering wheel 90 degrees right and left it makes a clunking noise. Put up on a hoist and doing the same it makes no noise. What is it.

...clunking noise. Put up on a hoist and doing the same it makes no noise. What is it. the noise is generated by the weight on the points that are turning the hoist you should be using is a 4 post hoist ...

Question about 2000 B-Series

1 Answer

2003 Saturn Vue, noise when starting to drive, clunking noise. No vibration or noise if in drive with all 4 wheels off the ground.

...clunking noise. No vibration or noise if in drive with all 4 wheels off the ground. vibration and clunking can be the drive shafts universal joints if its not clunking off the ground this is because ...