Questions & Answers for: Chevrolet clue suspect

...Suspect vehicle is a 1985 Chev 1/2 ton 4x4, ugly beyond description. Problem is amp draw on battery with ignition off and all switches off. Clue, or maybe red herring, is that the idjut lite for ...

...dead miss,or the fuel is uuting off. This problem is only noticeable at 12-1500 rpms. Do you have a clue,as to the problem? I suspected "water in my fuel,from the last fillup on 30 Jan.and 31 Jan. I ...

...suspect that this is a separate problem as the 262 engine does not run well on this horrible new 10% ethanol fuel and it makes it throw an O2 sensor code. Does anybody have a clue here? I changed the ...

misfire -- 98 blazer my blazer has two main misfires cylinders 4 and 5 No other History, symptoms, clues, things checked? Would check the compression on all the cylinders; suspect 4 and 5 could be low

...suspect a faulty sensor .service light can be put out if you know the sequence of what to hold on or push on the controls when you turn ignition on and hold for so many seconds but in all honesty i ...

...suspect MAP/MAF sensors. I cant remember which it has but if it is the MAF then it is common for the MAF to get dirty and cause a misreading. Cleaning it with the right cleaner can often solve the ...

...Don't have this but if you could have given more info maybe I could have given you some elimination clues. Note that the computers (ECM)  on these vehicles are in front of the wheel well behind ...

clue . . . about cars. I have heard several heater cores gurgle on these. Usually the noise is most noticable when accelerating and will sound like it's coming from the right side of the dash ahead of

...Always check for trouble codes when an engine problem develops. Codes stored in memory may have clues to why it won't start. If no codes are present and no spark (no ignition), suspect a bad

...Suspect battery problems did you have the new ignition switch and key flashed to vehicle Which part of the ignition switch did you replace , electrical or key and lock cylinder ? You need to be more ...