Questions & Answers for: clu 5713tsi manual

the front panel digital array button the left side of the screen is off and in order to fix it we have to hit the array button to start the aligament system There should be a little door directly ...

...CLU-5713TSI remote control. It says that i need to use the setup button, but i cant find t on the remote and i lost my owners manual. can u help me? (this is the remote control i have) Here is the ...

programming a hitachi remote to a dish network box I have a manufacturer issued hitachi remote and I use that to operate my dish network satellite. The remote isn't operating my dish. Do I need a ...

I have an old Hitachi CLU-577TSI remote and want to program it To operate a new LG LCD/DVD Combo. 26LG40 and 32LG40. Is this even possible? I found the codes for the LG if you want to program the ...

No access to channels over 37 (Not a cable provider problem) I have a Hitachi MT-2381 without the remote and I can't access channels over 37. I contacted my cable provider and there seems to be no ...

...clu 5729tsi to the cable box Try this as all remotes work about the same when manual setting. Here you go. This will work with most all universal remote controls. If you don't have the code do the ...

CLU-5713TSI. Can you guide me through manual convergence? You have all the resistor are correct! Yes I can Tell you exactly what you need to know and How to Save settings after you adjust convergence,

i'm looking for the manual for my Hitachi Clu-5713tsi remote Hi,you can download the manual for your phone at the hitachi website or at www.manualsonline.com or manualnguide.com. Thanks and take care

I need the code to program my hitachi remote control to a SDV290 Toshiba Dvd player? Hi, 1.Turn on the component to be programmed, such as the television or DVD player. 2.Press the "Code Set" button ...

I DROPPED MY REMOTE AND THE BATTERYS CAME OUT AND NOW I CANT TURN THE CHANNEL SO I NEED TO KNOW HOW TO PROGRAM MY REMOTE Hi. Manual Programming: 1. Turn on the device with which you want to use the ...