Questions & Answers for: close rear paper exit cover

...3).left the flap at the front of the printer adn remove any jams heneath the lap. 4).Open the rear exit and remove any james. close all covers and reinsert the paper tray and turn on the

Ad

...close the toner cover,do the motors turn at all?if not then the printer thinks there is a jam and so one of the sensors may be blocked or stuck out of position.ususlly this would be one of the main ...

Ad

Question about CLP-510 Laser Printer

2 Answers

rear edge, align it with the slot, and slide it into the printer. 6 Close the right cover. The printer will resume printing. In the Multi-purpose Tray ?Jam0 In MP Tray? appears on the display when you

Question about PIXMA MX310 All-In-One Printer

2 Answers

...close the rear cover. Power on the printer and confirm that the Alarm light is off. The jammed paper should automatically eject. To resume printing, load the paper in portrait orientation. Call our ...

Question about PIXMA MX310 All-In-One Printer

1 Answer

...remove the paper by pulling in the direction. - If the paper tears, make sure that all of the paper fragments are removed from the printer. 5. Close the rear cover. Printing automatically

Question about 1815dn All-In-One Laser Printer

1 Answer

...jammed paper out. Return the levers, fuser door, rear cover stopper, and duplex guide to their original position. Close the rear cover. Open and close the front cover. Printing automatically

Question about MFC-6890CDW Printer

1 Answer

...Close the Inner Back(Rear) Cover (1) if it is open as shown in the illustration. Close the Outer Back(Rear) Cover. Make sure the cover is closed properly. Pull the paper trays (1) out of the ...

Question about SCX 4521F All-In-One Laser Printer

1 Answer

...rear cover open." so pls. check with the front door right side portion. you can see a small leaver there, pls. check that liver correctly go inside the cover after we close the front door. other ...

Question about SCX 4521F All-In-One Laser Printer

1 Answer

...rear cover, you may need to open it to clear the jam completely. Remove Paper Trays (if necessary): If the jammed paper extends into the paper trays, you may need to remove the trays to access and ...

Question about SCX 4521F All-In-One Laser Printer

1 Answer

Close the rear door to allow the printer to attempt to clear the jam message. Check the fuser unit: If clearing the jammed paper doesn't resolve the issue, it's possible that the paper is stuck in the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66837 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...