Questions & Answers for: close front cover 7820n

...instructions listed below. Open the front cover. Press the Options key on the control panel. The display will show "REPLACE DRUM - 1.YES 2.NO". Press 1 to reset the drum count. Close the front

...you mean, DRUM Reset. Open the front cover. Press the Options key on the control panel. The display will show "REPLACE DRUM - 1.YES 2.NO". Press 1 to reset the drum count. Close the front

...the panel. 3 - Press 1 to reset 4 - Close the front cover done. If the issue persists after resetting your drum contact brother technical support you may have a defective drum unit. Thanks, ...

The change drum message is still on after changing the drum to a brand new "Brother" Brand drum. How do I make it turn off! -open the front cover. -press option key -press key "1" -close front cover

...paper. 5. Reinstall the drum and toner. 6. Make sure to close the front and back covers. 7. Turn the power back on. If the message stays after all this, there may be a sensor not working. Thanks, ...

2) Press the Options key on the control panel. The display will show "REPLACE DRUM - 1.YES 2.NO". 3) Press 1 to reset the drum count. 4) Close the front cover. Good Luck and Thank You for using Fixya

...how to reset it, Open the front cover of the machine, press the clear/back (or options) button. it will say replace drum? press *00 close the front cover this will reset the toner cartridge for

...advise. Thank you, Alecia Open front cover where drum/toner goes in Press "Options" key on control panel LCD will display "Replace Drum 1. Yes 2. No" Press 1 to reset drum Close front ...

... open front cover, press option key, press key "1", close cover. I do not have an option key. If I do, where is it? If there is a 'clear/back' botton better to use it rather than 'option' ...

FRONT COVER MESSAGE WILL NOT GO I cannot get the paper jam inside open the front cover message to go and there is no paper stuck inside. First check again if cover closed properly. If message does not