Questions & Answers for: Hoover clogging

Question about U5507900 Elite Rewind Bagless Upright Vacuum

1 Answer

Reverse Suction My machine is blowing out instead of suction. You have a clog either at the inlet by the brush roll or in the hose. Pull the hose and check for suction at the end of the hose, If it is

Ad

Question about F7425-900 SteamVac V2 Widepath Upright Vacuum

1 Answer

mine doesn't work very long without getting over heated and stops I have cleaned all the hoses and they aren't clogged. Any idea will help.My warranty ran out last month.(Of course) There is a clog in

Ad

Question about U6630-900 WindTunnel Bagless Upright Vacuum

1 Answer

The vacuum used to pick up great and now it doesnt want to what could be the problem? The hose that leads from the brush area to the bagless area is clogged. You will probably have to remove or ...

Question about U5753-900 WindTunnel Bagless Upright Vacuum

1 Answer

Hoover Turbopower Wind Tunnel V2 - clogged - cannot find a way to get at the clog - HELP! i took off the bottom black piece...removed the brushes ..took a coathanger and went down in silver dollar ...

Question about U5753-900 WindTunnel Bagless Upright Vacuum

1 Answer

...is still there What is the problem? Thanks. Something between the bag and the suction opening is clogging the vacuum. Start at the bag. Remove the bag and check for a clog. Remove the hose from

Question about U5753-900 WindTunnel Bagless Upright Vacuum

1 Answer

I have a new Hoover vacuum the one designed for pets...and it constantly is throwing dust out when I vacuum...I can't seem to get the hose unplugged...how do I do this? First, complete detach the hose

Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

1 Answer

Vacuum shuts off while in use After 5-10 minutes of use the vacuum shuts off and cannot be restarted. There is a thermal reset inside the motor that shuts it off. There may be a clog.somewhere or ...

Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

1 Answer

How to remove a clog Hey there! Most of our vacuums you are able to remove the tool hose without the use of a screwdriver or other tools. Follow these brief steps to check your vacuum for clogs. ...

Question about S3330 / S3332 Straight Suction Telios Bagged Canister Vacuum

1 Answer

Why does metallic cover keep blowing off when operating? Hey there! It sounds like your vacuum may be clogged causing it to redirect the air flow which may be causing the cover to blow off. To check ...

Question about S3330 / S3332 Straight Suction Telios Bagged Canister Vacuum

1 Answer

hoover vacuum shuts off minutes hoover vacuum shuts off after 5 minutes. Is this a safety feature? Check your bag or collection area and see if it is full or clogged. low air flow may cause extra heat

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Hoover Vacuum Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...