Questions & Answers for: clod water

...clod water intake. Please can you tell me which way round they should be connected ... is hot or cold pipe connected at the top? connect at random. put on a rinse cycle. if cold water comes in then ...

...clod water run into the machine. I've replaced water lines and facets and got good pressure from the water lines. I even checked the water hose and it was OK. But when I connected the washer back up ...

My shampooer is not putting out soap in a steady stream.It is like it is clodded up. I have taken all the parts apart that I can and cannot find any clods. The plastic screen which suppose to be ...

...clod seal hose water blowing out the resivore and cold seal hose closed off ..only overheats acfter ac is on for ten minutes just sitting but if driving ok Thermostat may be sticking closed somewhat ...

maytag neptune washer clod water works but hot water doesn't check hose connections

...clod water. Hi, If your washing machine will not fill, only hot or cold will fill or is slow tofill then read these tips. I have covered many of the things that can happen inthese tips... Washing ...

on the carpet? I found that if the water is not hot enough it won't create the suction needed for the water to spray. If you have use it in the past it could be that the water tubing could be clod

Not releasing steam when heated up Ur starting off with clod water rite ! Because u never put hot water into anything that steam cleans !( carpet , steam mop,iron)

water in the freezer compartment bottom-freezer The drain tube is frozen or clodded

Hi Kenmore elite top loading, when it is on hot/cold and it starts filling only clod water, if I shut off the cold it does get hot water Defective mixing valve