Questions & Answers for: clock date want stay set

clock on this machine, I've had problems. Now with the passing of the old DST switchover date, it seems to want to stay stuck 1 hr behind. Isn't this machine supposed to set its own clock by detecting

...date and time will not stay set. Everytime is turned off and back on has to be reset. Can anyone help? Thanks Have you changed the CR2016 clock battery? See the picture and sentence at the bottom of ...

...plus" button again to set it in place -- at least I think that's what I did After pressing clock /calendar key I pressed the time set (M+) and entered the correct time and date using the key

...clock and found the month of May was flashing wiht the year 2045. I reset time and date, quit setup in about 2 to3 mins. the time jumped ahead again. the time wont stay set correct on my GoVideo ...

...CLOCK BATTERY MUST BE DEAD OR MOSTLY DEAD. AT LEAST IT IS WORTH CHECKING OUT. THIS IS THE MOST LIKELY CAUSE OF TIME DATE FAILURE BECAUSE IT WILL RUN WITH THE MAIN BATTERY POWER WHEN THE CAMERA IS ON, ...

clock and date every time i open my pc ihave to set the clock and date, the backup bettery is new Hi there. Download the latest bios update for that model motherboard or PC, install it and restart the

...a time server? Right click on the clock in the taskbar, select adjust date/time. On the internet time tab, click advanced settings. I would recommend using time-a.nist.gov instead of ...

...on Model 87801 Skyscan clock Everything except time is correct (indoor/outdoor temp, date) because I cannot get it to stay on DST. I have Set, +, ALM, & SNZ options. ...

...date will not stay at new setting reverts back to 2009 Usually means the power for the memory circuit is not good. Most clocks- radios have a memory power circuit and a power circuit for the display. ...

...date-month & day, but not the correct day such as Sat when the clock says Monday. check you have set to the correct year, and remember a leap year has one day more... note date,month stays the same ...