Questions & Answers for: Pentair climbing

...2hp pump and pentair clear plus cartridge filter. The navigator worked great for couple months, climbing the walls ecc. I know there is a little wear on the toes, but the pressure guage is higher ...

I installed a new pentair de filter and new multiport valve. at start up the filter pressure reads 40 psi. after multiple backwashes and rinses the pressure goes down to about 15 psi but slowly ...

i got a legend platinum poll cleaner this week and it dosent come up to the shallow end.my slope isnt very steep and the cleaner seems to have plenty of power because it climbs the walls fine.ive ...

Cleaner lacks power won't climb sides I'm trying to figure out why my pentair Legend doe not operate with sufficient power to climb the sides or appears to lack power. I rebuilt the pump replacing ...

won't climb sides Here are some troubleshooting tips dealing with these pool cleaners. If your cleaner is not cleaning the entire area that it should be cleaning, try these tips. Make sure that the ...

pentair great white won't climb sides won't climb sides check inside hoses might have come off or belts

my pentair legend says in deep end no matter were i adjust the thruster jets the cleaner doesn't want to climb out of the deep end. just goes around in circles in the deep end if thruster is ...

Pump has big air bubbles and vacuum stopped working My pool vacuum stopped working and my Whisperflow pump has a lot of visible air bubbles where it used to have none. If I fiddle with it (turn it off

My Gw9500 won't climb all walls in my pool Over the last 7 months the gw9500 bumper gas actually etched the walls of my pool where it can't climb. Pressure is good. The bumper for the gw9500 is also ...