Question about HPD18K - 2 High Performance Cordless Drill/Driver
keyless chuck will not tighten down enough to hold bit When drilling, the bit comes lose, when inserting the bit, I held the outer ring - felt the "click" that means it is tight. Started drilling, and
Question about DC920KA Heavy Duty Xrp 18V Cordless Drill/Driver
I have a DCD940KX 18v Dewalt drill driver with the one click drill chuck. It does not keep drill bits or screwdriver bits from spinning. They spin with the slightest bit of pressure on them. My ...
Question about BD12PSK 12-Volt Smart Select Drill
...is stuck. chuck wont open. turns but makes a bit is stuck. chuck wont open. turns but makes a clicking noise the chuck is broken inside if clicking. Ace and True Value stores sell chuck ...
Question about DC920KA Heavy Duty Xrp 18V Cordless Drill/Driver
I cannot open a Dewalt 954 cordless drill chuck. My socket adapter is stuck in the chuck. It is a borrowed tool and I need to return it in the same shape that i received it. Help. No TWO men can exert
put drill in revcerse and the chuck comes loose dropping the bit out Yup, that is what happens. You can lessen that by really cranking it down, but it is an issue with most hand tightened chucks, and ...
Hi I have a milwaukee drill 18v HD 18DD. The teeth inside that hold the drill piece won't adjust anymore. I can't turn the grip that controls them more than one click. Any ideas? the new chucks are ...
...chuck, you should hear clicking when the bit is tightening, this is the chuck locking itself on the but. and when going in reverse make sure you dont have your hand or have the chuck pressed against ...
top chuck just clicks but won't change bit size? put alot of pressure on 18" bit and after chuck had to be loosened with channel locks. no chuck key. now top end just clicks and spins but ...
Question about 18 Volt Compact Drill Kit
...chuck (the part you were calling the head) and gently squeeze the trigger up the point that you cannot hold on. If you hear clicking, and it doesn't torque very much, you need to turn the torque ...
Question about 18 Volt Compact Drill Kit
How do I change the bit on my porter-cable 18v drill? Where/how do I line up the black dial with the silver dial to release the bit?? I just looked at some illustrations on ebay of Porter-cable 18 ...
Usually answered in minutes!
227 Questions
165 Questions
160 Questions
104 Questions