Questions & Answers for: clear plastic computer speakers

...plastic. use a clear silicone based sealant (similar to the type used for caulking and in fish tanks) I'm guessing you used CA or superglue, and thats what melted your plastic, you're using too much ...

...male to male jack. http://www.cobyusa.com/_en/prod_item.php?item=CSMP37&pcat=homeaudio&pscat=speaker_system&pscat2=# Lift the clear plastic, where the hinges were laying now uncovers the secret

...computer. If this still doesnt work, let me know. Thanks Hi, I had exactly the same problem with BA Media Theatre speakers (Gateway) - headphones working but no sound out of the speakers. Two ...

...Clear the cmos As it is seen from the image there isn't any speaker on the motherboard. an internal speaker is a black plastic cylindrical object with a little hole on the top. some motherboards like ...

...plastic 'plugs' that cover them. It's easy, I just did it! There are no wires to worry about as just the clear cover lifts off, so you can dust/clean inside... Hi , You should be able to disassemble ...

...plastic shell and loosened the speaker from its mounting, the the big round metal piece/magnet sits within the actual speaker 'cage', slightly behind the speaker cone. It's tight but movable and can ...

...clear to both of us: internal speakers on Philips TVs **** and you want some external speakers and use the TV remote to control them. With this in mind I bought a cheap memorex ipod speaker-dock with ...

...plastic front of the computer is the Front Panel. The area of pins on the motherboard, that the cables (Wires) from the Front Panel go to, is the Front Panel header. (M-Front Panel Connector) ...

clear speaker plastic inside...Furby will magically be able to speak again! Break off the rest of the q-tip so you can put furby's fur back on, replace the plastic ring and battery cover....Done! FYI.

...clear substance that makes your hair stay on small plastic brick toys, you would get another problem because you haven't described what you are doing. you might try restating your question with a lot ...