Questions & Answers for: Minolta how to clear memory

...memory from needing reset. if the film is completely clear the film was not exposed to light. now if the film was transported and the meter and LED was working then the shutter was not opening, an ...

and i have this problem apear the message: "Turn the main switch off, an then turn on following instructions" but nothing happening !!!! pls help Perform Initialize procedure or Memory clear procedure

...memory clear is performed. SOLUTION: To correct the C-03FF code, set the machine to the correct speed by performing the following: 1. Enter the service mode. 2. Select 2 for the adjust mode. 3. Go to ...

...you can turn it off and unplug it from the wall for 10-15 seconds and then turn it back on. Doing this will erase the Random Access Memory and should clear all fax and print jobs from the

...clear the memory then in service mode METER COUNT STOP00 STOP01 PRESS 11 PRESS THE START KEY UNTIL CLR appears THE PRESS the START key to blank it out the in will reappear POWER off the machine wait ...

...clear the memory 1-Press Utility/counter button. 2-Press STOP, 0,0, STOP, 0,1. 3-Now press the down arrow key and come to the "function" 4-now in this option, select Memory clear.clear the memory by ...

clear the fax memory someone sent a 645 page fax and it is stored in memory and i can not clear it. Get a paper clip and stick the clip in the small hole on the right side of the control panel it will

clear the memory on a minolta 751\601, we were doing alot of scanning to email and it shows 100% and we can't scan anymore but can print and copy 100% mean it is ready not full You may have memory

...see (Though sensors though out the paper route thru the machine so it thinks there is a paper jam) Also mite want o clear the memory (SRAM/DRAM) will lose one touches so make sure you have list ...

...6001 is not a digital machine. It is analog. As for RAM there is a memory for the counters on the screen but some one can clear it lucky there is the hard counter. What is the issue with this