...code will be retained in memory for 40 warm-up cycles. To clear the codes for the purposes of testing or confirming repair, perform the code reading procedure. When the fault codes begin to be ...
...code of (22-12-2) I clear them and they don't clear. soon as I reconect batt i check for code before even starting again and codes are thier. 22 manifold absolute pressure (MAP) sensor circuit out of ...
...for about 5 minutes to try to clear the code, if that does not work, get your hand on a code scanner, and clear the code, if the code comes right back, you still have a fault in the air bag
How do i clear fault codes in my 2010 ranger without a scanner?thanks goto most any auto parts store and ask them to clear the codes.
...CLEAR CODE! IF IT RETURNS, THERE MAY BE SOMETHING WRONG! Hi, you're probably going to have to replace the ignition module itself to clear that code. It is the part inside the distributor that's ...
...clear code 118 and 224 on 1994 ranger We have checked coils, they are OK Ford Ranger/Explorer/Mountaineer 1991-1999Clearing CodesCONTINUOUS MEMORY CODESKEEP ALIVE MEMORYPrintCONTINUOUS MEMORY ...
code po500 will not clear, speed sensor replaced replaced sensor, cleared the code, code returned, drove over 400 miles and code still present, cel is not on but code remains You could have a bad wire
Question about 2006 Ranger
...o2 sensor replacement will not necessarily clear code . It may be necessary to use a scanner for that . O2 sensors are located after the cat converter and is not a heated unit as is the HO2S ...
Question about 2007 Ranger 2.5
...CLEAR THIS CODE P 0108 code I HAVE ALREADY REPLACED THE AIR FLOW METER AND STILL WONT CLEAR. The MAP sensor on the 2.5 is mounted on top of the intake manifold. Ford OEM Motorcraft parts and vanity ...
...In most cases the code can be clear by disconnecting the car battery for about 30 minutes. http://engine-codes.com/p0455_ford.html ...
Usually answered in minutes!
642 Questions
645 Questions
573 Questions
562 Questions
558 Questions