Questions & Answers for: Oldsmobile clear code

CODE CLR' or 'E NOT CLR' on Riviera, 'EOM CODES CLEAR' or 'ECM CODES NOT CLEAR' on Toronado and Trofeo. This message will appear for 3 seconds. After 3 seconds the display will automatically return to

clear code to turn the light off and again the condition that caused the light to come on has to be corrected or the light will come back on. For 1996 or newer you can go to auto zone, advance auto, o

...flow at the front calipers. ABS system is blocking fluid flow. Must pull codes, repair codes then clear codes to get flow to rear. Advance Auto will pull codes ...

how to turn off service engine soon light you must have the codes cleared for the light to go off, but it came on for a reason go to Auto Zone and ask them to read the codes and then clear them. the ...

...code ( or codes ), clear those codes , which turns out the light. Drive the unit for 50 or more miles, if the light comes back on there is a malfunction with some engine management system. The codes ...

...similar. The code will clear itself after the ECM is satisfied the fault is no longer there. This could take a few days of driving providing what you did with the gas cap actually solved the

and still the history code did not clear. Any ideas?? The electronic brake control module (EBCM) automatically clears the history DTC when a current DTC is not detected in 100 consecutive drive cycles

...clear the code and the lights will not go away? Any ideas? Only the computer can clear history codes . If the problem was fixed in about 100 ignition cycles the computer will clear this codes . Code ...

...his machine Please understand the problem or problems have to be fixed before the codes will remain cleared. If the problem exists, the code will return as soon as you turn the key on. Have you fixed ...

How do I clear the codes for my1991 Oldsmobile 88 royal. I had to change the etc 41 sensor & the mass air sensor. Now I need to clear them and don't know how disconnecting the battery for a couple ...